Reference Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• disabled: Disables BIOS console
redirection.
NOTE: The attribute crab is valid
for Dell PowerEdge 9G systems
only.
attribute=cpucle setting=enabled | disabled
• enabled: Enables processor C1-E
after system reboot.
• disabled: Disables processor C1-E
after system reboot.
attribute=cpuht setting=enabled | disabled
• enabled: Enables logical
processor hyperthreading.
• disabled: Disables logical
processor hyperthreading.
attribute=cpuvt setting=enabled | disabled
• enabled: Enables virtualization.
• disabled: Disables virtualization.
attribute=cpuxdsupport setting=enabled | disabled
• enabled: Enables Execute Disable
(XD) support on the system.
• disabled: Disables XD support on
system.
attribute=cpucore setting=1 | 2 | 4 | 6 | 8 | 10 | 12 |all
• 1: Enables one core per processor.
• 2: Enables two cores per
processor.
• 4: Enables four cores per
processor.
• 6: Enables six cores per
processor.
• 8: Enables eight cores per
processor.
• 10: Enables ten cores per
processor.
• 12: Enables twelve cores per
processor.
• all: Enables the maximum cores
per processor.
attribute=dbs setting=enable | disable
• enable: Enables Demand Based
Switching (DBS) on the system.
• disable: Disables DBS on the
system.
attribute=diskette setting=off | auto | writeprotect
• off: Disables the diskette drive.
• auto: Auto-enables the diskette
drive.
• writeprotect: The diskette drive is
available in read-only format only.
63