Reference Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
NOTE: On Linux systems, user or
user groups upgraded to
administrator or administrator
groups cannot configure this
BIOS setup setting.
attribute=bootmode setting=uefi | bios
• uefi: Enables the system to boot to
operating systems that support
Unified Extensible Firmware
Interface (UEFI).
• bios: Enables the system to boot to
operating systems that do not
support UEFI.
attribute=bootorder sequence=aliasname1,
aliasname2,..... aliasnameN
Configures the boot sequence
according to the set aliasnames. To
view the set alias names, run the
command omreport chassis
biossetup
attribute=bootorder
NOTE: On Linux systems, user or
user groups upgraded to
administrator or administrator
groups cannot configure this
BIOS setup setting.
attribute=hddorder sequence=aliasname1,
aliasname2,..... aliasnameN
Configures the BIOS setup hard disk
sequence according to the set
aliasnames. Changes takes effect
after rebooting the system. To view
the set alias names, run the command
omreport chassis
biossetup
attribute=bootorder
NOTE: On Linux systems, user or
user groups upgraded to
administrator or administrator
groups cannot configure this
BIOS setup setting.
attribute=cstates setting=enabled | disabled
• enabled: Enables the processor to
go into a deep sleep state when
the system is not utilized.
• disabled: Disables the processor
to go into a deep sleep state when
the system is not utilized.
attribute=conredirect setting=enabled | disabled
• enabled: Redirects the BIOS
screen output over serial port 1.
Keyboard and text output are
redirected over serial port 2.
• disabled: Turns off the BIOS
console redirection.
attribute=crab setting=enabled | disabled
• enabled: Enables BIOS console
redirection after system reboot.
62