Reference Guide
privilege you need to run the command, where U = User, P = Power User, and A = Administrator.
Use
is a very general
statement about the actions that are performed using omconfig.
NOTE: Although the following table lists all possible omconfig commands, the commands available on the system
depend on the system configuration. If you try to get help or run a command for a component not installed on the
system, Server Administrator displays a message that the component or feature is not found on the system.
NOTE: When CSIOR (Collect System Inventory on Restart) is disabled, omconfig does not allow to configure the
BIOS settings.
Table 19. omconfig Command Level 1, Level 2, and Level 3
Command
Level 1
Command Level
2
Command Level
3
User
Privilege
Required
Use
omconfig
about U, P, A Shows the version number and properties for the
Server Administrator program.
details=true U, P, A Displays information for all Server Administrator
programs that are installed.
preferences
cdvformat A Specifies the delimiter for separating data fields
reported in custom delimited format (cdv).
dirservice A Configures the Microsoft Active Directory service.
messages A Displays the configured alert message format.
snmp A Sets the SNMP root password. Configures SNMP Set
Operations.
useraccess A Determines whether users below the administrator
level are allowed to use Server Administrator or not.
webserver A Allows the administrator to set the encryption levels of
the Web server and configure the URL launch point in
the Server Administrator Web server environment.
system or
servermodule
alertaction P, A Determines in advance the actions taken for warning
or failure events on intrusion, fans, temperatures,
voltages, power supplies, memory, and redundancy.
alertlog P, A Allows the administrator to clear the alert log.
assetinfo P, A Enters and edits cost of ownership information for the
system, including values for depreciation, lease,
maintenance, service, and support.
cmdlog P, A Allows the administrator to clear the command log.
esmlog P, A Allows the administrator to clear the ESM log.
events P, A Enables or disables SNMP traps.
57