Reference Guide

Omreport Chassis Hwperformance Or Omreport Mainsystem Hwperformance

Use the omreport chassis hwperformance or omreport mainsystem hwperformance command to view the status and

cause for the system’s performance degradation. When you type:

omreport chassis hwperformance

Server Administrator displays a summary of the system’s hardware performance degradation information.

NOTE: This command is applicable only to selected Dell 10G systems that support PMBus.

Depending on the system’s configuration, you may notice the following output:

Hardware Performance

Index : 0

Probe Name : System Board Power Optimized

Status : Normal

Cause : [N/A]

Omreport Chassis Info Or Omreport Mainsystem Info

Use the omreport chassis info or omreport mainsystem info command to see a summary of installed component

versions. Type:

omreport chassis info index=n

omreport mainsystem info index=n

The index parameter specifies a chassis number and is optional. If you do not specify the index, Server Administrator

displays summary chassis information for each chassis. If you specify the index, Server Administrator displays summary

information for a specific chassis.

NOTE: If iDRAC is installed, Server Administrator displays the Lifecycle Controller version. If BMC is installed,

Server Administrator displays the USC version.

Depending on the system’s configuration, you may notice the following output:

Index : 0

Chassis Name : Main System Chassis

Host Name : WIN-27C02UQFV6L

iDRAC7 Version : 1.00

Chassis Model : PowerEdge R720

Chassis Lock : Present

Chassis Service Tag : 7654321

Express Service Code : 15608862073