Reference Guide

omconfig Start Battery Learn Cycle
Table 117. Omconfig Start Battery Learn Cycle
Description Starts the battery learn cycle.
Syntax
omconfig storage battery action=startlearn controller=id
battery=id, where id is the controller ID and battery ID as reported by the omreport
command. To obtain this value, type omreport storage controller to display the
controller IDs and then type
omreport storage battery controller=ID to
display the ID for the controller battery.
Example to Start the learn cycle on controller 1.
Example
omconfig storage battery action=startlearn controller=1
battery=0
Omconfig Delay Battery Learn Cycle
Table 118. Omconfig Delay Battery Learn Cycle
Description Delays the battery learn cycle for a specified period of time. You can delay the battery learn
cycle for a maximum of seven days or 168 hours.
Syntax
omconfig storage battery action=delaylearn controller=id
battery=id days=d hours=h, where id is the controller ID and battery ID as
reported by the omreport command. To obtain this value, type omreport storage
controller
to display the controller IDs and then type omreport storage
battery controller=ID to display the ID for the controller battery.
Example to Delay the learn cycle for three days and 12 hours on controller 1.
Example
omconfig storage battery action=delaylearn controller=1
battery=0 days=3 hours=12
Omconfig Global Commands
The following table displays the omconfig command syntax required to execute the global commands. When executed,
these commands apply to all controllers. These global commands also correspond to the global tasks provided by the
Storage tree view object’s Information/Configuration subtab.
Table 119. Omconfig Global Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs
omconfig storage
globalinfo
action=enablests
action=disablests
action=globalrescan
action=setprotectionpolicies type=ghs or dhs
Omconfig Global Enable Smart Thermal Shutdown
By default, the operating system and server shut down when the PV220S and PV221S enclosures reach a critical
temperature of 0 or 50 degree Celsius. However, if you have implemented connector redundancy on the PV220S and
PV221S enclosures you can specify that only the enclosure and not the operating system and server are shut down
when the enclosure reaches a critical temperature of 0 or 50 degree Celsius. Specifying that only the enclosure is shut
169