Reference Guide

Omconfig Convert RAID To Non-RAID
Description
Converts RAID to non-RAID on a physical disk.
Syntax
omconfig storage pdisk
action=convertraidtononraid
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies the
physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
NOTE: To convert multiple RAID to non-RAID on a
given controller, use omconfig storage controller
action=convertraidtononraid command. For more
information, see omconfig Convert Multiple RAID To
Non-RAID.
Example to Convert RAID to non-RAID on physical disk 3 on connector
0 of controller 1. On a SAS controller, the physical disk
resides in enclosure 2.
Example for SAS controllers
omconfig storage pdisk
action=raidtononraid controller=1
pdisk=0:2:3
Omconfig Convert Non-RAID To RAID
Description
Converts non-RAID to RAID on a physical disk.
Syntax
omconfig storage pdisk
action=convertnonraidtoraid
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies the
physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
NOTE: To convert multiple non-RAID to RAID on a
given controller, use omconfig storage controller
action=convertnonraidtoraid command. For more
information, see omconfig Convert Multiple Non-
RAID To RAID.
Example to Convert non-RAID to RAID on physical disk 3 on connector
0 of controller 1. On a SAS controller, the physical disk
resides in enclosure 2.
Example for SAS controllers
omconfig storage pdisk
action=nonraidtoraid controller=1
pdisk=0:2:3
140