Reference Guide

summary. The summary shows version information for the systems management software installed on the system; for
example, Server Administrator 1. x .
Some commands have command level 1 and command level 2 and one name=value pair. Consider the following example
command that instructs Server Administrator for more details about the environment for Server Administrator:
omreport about details=true
In this example, command level 1 is omreport, command level 2 is about, and the name= value pair is details=true.
Many commands use command level 1, command level 2, and command level 3, but do not require any parameters
(name=value pairs). Most omreport commands are of this type. For example, the following command displays a list of
alert actions that are configured for components on a system.
omreport system alertaction
The most complex commands have all three command levels and can have multiple name=value pairs. The following is
an example of two name=value pairs:
omconfig system assetinfo info=depreciation duration=3
The following is an example of nine name=value pairs:
omconfig system assetinfo info=acquisition purchasecost=<n> waybill=<n>
installdate=<mmddyy> purchasedate=<mmddyy> ponum=<n> signauth=<text>
expensed=<
yes>|no> costcenter=<text>
In each chapter of this document, command syntax and other information about the commands are formatted using any
of the following fields as appropriate:
command level 1 command level 2 command level 3 name=value pair 1 name=value pair 2
14