Manualshelf

Reference Guide

ManualsBrandsDell ManualsRAID controllersOpenManage Server Administrator Version 7.3
131132133134135136137138139140
the controller ID. The <PDISKID> variable specifies the
physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
Example to Rebuild physical disk 3 on connector 0 of controller 1. On a
SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=rebuild
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=rebuild
controller=1 pdisk=0:2:3
Omconfig Cancel Rebuild Physical Disk
Description
Cancels a rebuild that is in progress. If you cancel a
rebuild, the virtual disk remains in a degraded state. For
more information about Cancel Rebuild Physical Disk, see
the
Dell OpenManage Online Help
.
Syntax
omconfig storage pdisk
action=cancelrebuild controller=id
pdisk=<PDISKID>, where id is the controller ID. The
<PDISKID> variable specifies the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
Example to Cancel the rebuild of physical disk 3 on connector 0 of
controller 1. On a SAS controller, the physical disk resides
in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk
action=cancelrebuild controller=1
pdisk=0:3
Example for SAS controllers
omconfig storage pdisk
action=cancelrebuild controller=1
pdisk=0:2:3
Omconfig Cancel Replace Member
Description
Cancels a replace member operation.
Syntax
omconfig storage pdisk
action=cancelreplacemember
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies the
physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
137