Reference Guide

Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
unit=days | months Whether the number for
duration refers to days
or months.
Example Command For Adding Warranty Information
To provide a value for a warranty parameter, type a command of the form omconfig system assetinfo info=warranty
<name=value pair 2> or omconfig servermodule assetinfo info=warranty <name=value pair 2>. For example, type:
omconfig system assetinfo info=warranty unit=days
or
omconfig servermodule assetinfo info=warranty unit=days
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command at the same time,
as long as all the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example
Command For Adding Acquisition Information.
119