Reference Guide

Adding System Information
System information includes the primary user of the system, the phone number for the primary user, and the location of
the system. The following table displays the valid parameters for adding system information.
Table 62. Valid Parameters Of omconfig system assetinfo info=system Or omconfig servermodule assetinfo info=system
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description
omconfig system or
servermodule
assetinfo info=system location=< text > Location of the system.
primaryphone=< n > Phone number of the primary
user of the system.
primaryuser=< user > Primary user of the system.
Example Command For Adding System Information
To provide a value for a system parameter, type a command of the form omconfig system assetinfo info=system
<name=value pair 2> or omconfig servermodule assetinfo info=system <name=value pair 2>. For example, type:
omconfig system assetinfo info=system location=firstfloor
or
omconfig servermodule assetinfo info=system location=firstfloor
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command at the same time,
as long as all the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example
Command For Adding Acquisition Information.
Adding Warranty Information
Use the omconfig system warranty or omconfig servermodule warranty command to assign values for warranty
information. A warranty is a contract between the manufacturer or dealer and the purchaser of a system. The warranty
identifies the components that are covered for repair or replacement for a specified length of time or usage. For details
on editing extended warranty values, see Adding Extended Warranty Information. The following table displays the valid
parameters for adding warranty information.
Table 63. Valid Parameters Of omconfig system assetinfo info=warranty Or omconfig servermodule assetinfo info=warranty
Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
omconfig system or
servermodule
assetinfo info=warranty cost=< cost > Cost of the warranty
service.
duration=< duration > Number of days or
months that the
warranty is in force.
enddate=< enddate > Date the warranty
agreement ends.
118