Reference Guide

Table 56. Valid Parameters Of omconfig system assetinfo info=lease Or omconfig servermodule assetinfo info=lease
Command
Level 1
Command Level 2 Command
Level 3
Name=
Value Pair
1
Name= Value Pair 2 Description
omconfig system or
servermodule
assetinfo info=lease buyout=< amount > Amount of money paid to
purchase a system from a
lessor.
lessor=< lessor > Business entity that is
leasing the system out.
multischedule=true |
false
Whether cost of leasing
the system is computed
by more than one rate
schedule.
ratefactor=< factor > Factor used to calculate
the lease payment.
value=< residual > Fair market value of the
system at the end of the
lease period.
Example Command For Adding Lease Information
To provide a value for a lease parameter, type a command of the form: omconfig system assetinfo info=lease
<name=value pair 2> or omconfig servermodule assetinfo info=lease <name=value pair 2>. For example, type:
omconfig system assetinfo info=lease value=4500
or
omconfig servermodule assetinfo info=lease value=4500
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfocommand at the same time,
as long as all the parameters for name=value pair 2 belong to the same name=value pair 1.
For an example, see Example Command For Adding Acquisition Information.
Adding Maintenance Information
Maintenance refers to activities required to keep the system in good working order. The following table displays the
valid parameters for adding maintenance information.
113