Reference Guide

Action Description
action=reboot Forces the operating system to shut down and initiates system startup, performs BIOS checks,
and reloads the operating system.
Components And Events Of Platform Events
The following table lists the components and the events for which you can set platform events. Components are listed in
alphabetical order, except that warning events always precede failure events for a component.
Table 45. Valid Parameters Of Omconfig System Platformevents
Event Name Description
alertsenable=true | false
true: Enables generation of platform event filter alerts.
false: Disables generation of platform event filter alerts.
NOTE: This setting is independent of the individual platform event filter alert
settings. For a platform event filter to generate an alert, both the individual
alert and the global event alert are enabled.
event=batterywarn Sets action or enables or disables alert generation when a battery device
detects that the battery is pending a failure condition.
event=batteryfail Sets action or enables or disables alert generation when a battery device
detects that the battery has failed.
event=discretevolt Sets action or enables or disables alert generation when a discrete voltage
probe detects that the voltage is too low for proper operation.
event=fanfail Sets action or enables or disables alert generation when a fan probe detects
that the fan is running too slow or not at all.
event=hardwarelogfail Enables or disables alert generation when a hardware log detects a failure
value.
event=intrusion Sets action or enables or disables alert generation when a chassis is opened.
event=powerwarn Sets action or enables or disables alert generation when a power device probe
detects that the power supply, voltage regulator module, or DC to DC converter
is pending a failure condition.
event=powerabsent Sets action or enables or disables alert generation when a processor probe
detects that the power supply is absent.
event=powerfail Sets action or enables or disables alert generation when a power device probe
detects that the power supply, voltage regulator module, or DC to DC converter
has failed.
event=processorwarn Sets action or enables or disables alert generation when a processor probe
detects that the processor is running at less than peak performance or speed.
event=processorfail Sets action or enables or disables alert generation when a processor probe
detects that the processor has failed.
event=processorabsent Sets action or enables or disables alert generation when a processor probe
detects that the processor is absent.
102