Reference Guide

omconfig servermodule alertaction event=currentfail broadcast=true

Example Fan Probe Actions

To generate alerts when a fan probe detects a failure value, type:

omconfig system alertaction event=fanfail alert=true

omconfig servermodule alertaction event=fanfail alert=true

Example Chassis Intrusion Actions

To clear all alert actions for chassis intrusion, type:

omconfig system alertaction event=intrusion clearall=true

omconfig servermodule alertaction event=intrusion clearall=true

Commands For Clearing Logs

You can use the omconfig system or omconfig servermodule command to clear the following logs: the alert log,

command log, and hardware or ESM log.

To clear the contents of the alert log, type:

omconfig system alertlog action=clear

omconfig servermodule alertlog action=clear

NOTE: Entering an invalid RAC user name may prevent the command log from displaying. Clearing the command

log resolves this condition.

To clear the contents of the command log, type:

omconfig system cmdlog action=clear

omconfig servermodule cmdlog action=clear

To clear the contents of the ESM log, type:

omconfig system esmlog action=clear

omconfig servermodule esmlog action=clear

NOTE: For more information about alert messages, see the

Dell OpenManage Server Administrator Messages

Reference Guide

at dell.com/support/manuals.

Omconfig System Pedestinations Or Omconfig Servermodule Pedestinations

Use the omconfig system pedestinations or omconfig servermodule pedestinations command to set IP addresses for

alert destinations.

The following table displays the valid parameters for the command.

100