Reference Guide

小心: omconfig storage controller action=resetconfig controller=id 重设控制器配置。重设控制器配置会永久破
坏连接到控制器的所有虚拟磁盘上的所有数据。这些虚拟磁盘上的系统或引导分区会遭到破坏。
表. 90: Omconfig 控制器命令
所需命令级别（1、2、3） 可选“名称=值”对
omconfig storage controller action=rescan controller=id
action=enablealarm controller=id
action=disablealarm controller=id
action=quietalarm controller=id
action=testalarm controller=id
action=resetconfig controller=id [force=yes]
action=createvdisk controller=id raid=<c | r0 | r1| r1c | r5 | r6 | r10 | r50 | r60>
size=<number | b | m | g | max | min> pdisk=<PDISKID> [stripesize=< 2kb | 4kb | 8kb |
16kb | 32kb | 64kb | 128kb | 256kb | 512kb | 1mb >] [cachepolicy=<d | c>]
[readpolicy=<ra | nra | ara | rc | nrc>] [writepolicy=<wb | wt | wc | nwc | fwb>]
[diskcachepolicy=<disabled | enabled>] [name=<string>] [spanlength=<n>] |
[secureflag=yes]
注: 对于固件版本为 6.1 和更高版本的 SAS 控制器上的 RAID 10，spanlength
是可选参数（默认值=2）。
action=setrebuildrate controller=id rate=<0 to 100>
action=setchangecontrollerproperties controller=<id> [bgirate=<rate>]
[reconstructrate=<rate>][checkconsistencyrate=<rate>][rebuildrate=<rate>]
[clearredundantpath=clear][abortcheckconsistencyonerror=<enabled/disabled>]
[loadbalance=<auto/disabled>]
[allowrevertibilehotspareandreplacemember=enabled/disabled]
[autoreplacememberonpredictivefailure=<enabled/disabled>]
[persistenthotspare=enabled/disabled]rate=<0 to 100>
action=discardpreservedcache controller=id force=<enabled/disabled>
action=createsecuritykey controller=id keyid=<keyid> passphrase=<passphrase
string> [escrow=yes] [filepath=<Absolute path to the escrow file>]
注: 如果设置 escrow=yes，请指定 escrow 文件路径。
action=changesecuritykey controller=id keyid=<keyid> passphrase=<passphrase
string> oldpassphrase=<oldpassphrase string> [escrow=yes] [filepath=<Absolute
path to the escrow file>]
注: 如果设置 escrow=yes，请指定 escrow 文件路径。
action=deletesecuritykey controller=id
action=setbgirate controller=id rate=<0 to 100 >
action=setreconstructrate controller=id rate=<0 to 100>
action=setcheckconsistencyrate controller=id rate=<0 to 100>
action=exportlog controller=id
140