Command Line Interface Guide

name=value pair 1
config=
name=value pair 2 Description
lfcr: BMC uses <LF-CR> as a new line sequence when
the BMC writes a new line to the console.
lf: BMC uses <LF> as a new line sequence when the
BMC writes a new line to the console.
config=user id=number enable=true | false
id=number: ID (in numeric format) of the user being
configured.
enable=true: Enables the user.
enable=false: Disables the user.
id=number enableserialoverlan=true |
false
id=number: ID (in numeric format) of the user being
configured.
enableserialoverlan=true: Enables serial over LAN.
enableserialoverlan=false: Disables serial over LAN.
NOTE: The enableserialoverlan option is
supported only on PowerEdge 9G systems.
id=number name=text
id=number: ID (in numeric format) of the user being
configured.
name=text: Name of the user.
id=number newpw=text
confirmnewpw=text
id=number: ID (in numeric format) of the user being
configured.
newpw=text: New password of the user.
confirmnewpw=text: Confirm the new password.
id=number
serialaccesslevel=administrator |
operator | user | none
id=number: ID (in numeric format) of the user being
configured.
serialaccesslevel=administrator: User with an ID has
access privileges of an Administrator for the serial
port channel.
serialaccesslevel=operator: User with an ID has
access privileges of an Operator for the serial port
channel.
serialaccesslevel=user: User with an ID has access
privileges of a User for the serial port channel.
serialaccesslevel=none: User with an ID does not
have access privileges for the serial port channel.
id=number
lanaccesslevel=administrator |
operator | user| none
id=number: ID number of the user being configured.
lanaccesslevel=administrator: User with an ID has
access privileges of an Administrator for the LAN
channel.
lanaccesslevel=operator: User with an ID has access
privileges of an Operator for the LAN channel.
lanaccesslevel=user: User with an ID has access
privileges of a user for the LAN channel.
lanaccesslevel=none: User with an ID does not have
access privileges for the LAN channel.
id=user id dracusergroup=admin |
poweruser | guest | custom | none
id=user id: User ID of the user being configured.
dracusergroup=admin: Enables the Administrator
user privileges.
93