Command Line Interface Guide

name=value pair 1 name=value pair 2 Description
NOTE: This option is supported on
systems prior to PowerEdge 12G
systems.
apc: Active Power Control (apc)
enables the demand-based power
management controlled by BIOS.
osctrl: OS Control (osctrl) enables the
demand-based power management
controlled by the operating system.
custom: This profile allows you to
configure individual BIOS settings. It
offers added control by displaying the
underlying BIOS settings.
cpupowermode=min | max |
systemdbpm | osdbpm
min: Sets the CPU power consumption
to minimum.
max: Sets the CPU power
consumption to maximum.
systemdbpm: Sets the mode to system
demand based power management.
osdbpm: Sets the mode to operating
system demand based power
management.
NOTE: These options are
applicable only when a custom
profile is selected.
memorypowermode=min | 800 | 1067 |
1333 | max
min: Sets the mode to minimum power
utilization.
800 | 1067 | 1333: Set the mode to 800,
1067, or 1333 MHz.
max: Sets the mode to maximum
performance.
NOTE: These options are
applicable only when a custom
profile is selected.
fanmode=min | max
min: Sets the fanmode to minimum
power utilization.
max: Sets the fanmode to maximum
power utilization.
NOTE: These options are
applicable only when a custom
profile is selected.
NOTE: Reboot the system for the power profiles setup options to take effect.
Omconfig Chassis Pwrmonitoring Or Omconfig Mainsystem Pwrmonitoring
Use the omconfig chassis pwrmonitoring or omconfig mainsystem pwrmonitoring command to configure power
consumption information.
The following table displays the valid parameters for the command:
86