Command Line Interface Guide

name=value pair 1 Description
expense of some memory capacity. The RAID mode
supported is RAID level 5 striping with rotational parity.
dddc: The dddc mode enables double device data
correction. This ensures data availability after hard failure
of x4 DRAM.
opmode=mirror | optimizer | advecc
mirror: Switches the systems to a mirrored copy of the
memory if the failing module has an uncorrectable
memory event. In the mirror mode, the operating system
does not switch back to the original module until the
system reboots.
optimizer: Enables the DRAM controllers to operate
independently in 64-bit mode and provide optimized
memory performance.
advanced ECC (advecc): Enables the two DRAM
controllers to combine in 128-bit mode and provide
optimized reliability. Memory that are not teamed by the
controllers is not reported to the operating system.
Omconfig Chassis Pwrmanagement Or Omconfig Mainsystem Pwrmanagement
Use the omconfig chassis pwrmanagement or omconfig mainsystem pwrmanagement command to configure power cap
and manage profiles that control power utilization.
NOTE: This command is valid only on systems prior to PowerEdge 12G systems.
The following table displays the valid parameters for the command:
Table 28. Valid Parameters Of Omconfig Chassis Pwrmanagement Or Omconfig Mainsystem Pwrmanagement
name=value pair 1 name=value pair 2 Description
config=budget cap=< value >
Sets the threshold value for power
budget.
NOTE: From PowerEdge 12G
system onwards, power budget
requires license to configure
power cap. If the appropriate
license is not installed or has
expired, the system displays an
error message. For more
information, see Dell License
Manager at dell.com/support/
manuals.
setting=enable | disable
enable: Enables powercap settings.
disable: Disables powercap settings.
unit=watt | btuphr | percent
watt: Configure the unit in Watts.
btuphr: Configure the unit in BTU/hr.
percent: Configure the unit in
percentage.
config=profile profile=maxperformance | apc | osctrl
| custom
maxperformance: Sets the processor
to the highest supported processor
state. It offers maximum performance
mode with minimal power economy.
85