Command Line Interface Guide

Group name=value pair 1 attribute= name=value pair 2 setting=

attribute=TcmActivation setting=NoChange | Activate | Deactivate

attribute=TcmClear

CAUTION: Clearing the TCM will cause loss of all

keys in the TCM. This could affect booting of the

operating system.

setting=Yes | No

attribute=TcmSecurity setting=On | Off

attribute=TpmActivation setting=NoChange | Activate | Deactivate

attribute=TpmClear

CAUTION: Clearing the TPM will cause loss of all

keys in the TPM. This could affect booting of the

operating system.

setting=Yes | No

attribute=TpmSecurity setting=Off | OnPbm | OnNoPbm

UEFI Boot Settings attribute=UefiBootSeq sequence=aliasname1, aliasname2,..... aliasnameN

Omconfig Chassis Currents Or Omconfig Mainsystem Currents

NOTE: This command is no longer available through Server Administrator.

Omconfig Chassis Fans Or Omconfig Mainsystem Fans

Use the omconfig chassis fans or omconfig mainsystem fans command to set fan probe warning thresholds. As with

other components, you can view both warning and failure threshold values, but you cannot set failure thresholds. The

system manufacturer sets the minimum and maximum failure thresholds.

Valid Parameters For Fan Warning Thresholds

The following table shows the valid parameters for setting fan warning thresholds:

Table 23. omconfig chassis fans or omconfig chassis fans

name=value pair Description

index= <

> Number of the probe or probe index (must specify).

warnthresh=default Sets minimum and maximum warning thresholds to

default.

minwarnthresh=<

> Minimum warning threshold.

maxwarnthresh=<

> Maximum warning threshold.

Default Minimum And Maximum Warning Thresholds

NOTE: Systems that contain ESM3, ESM4, and BMC capabilities do not allow you to set warning threshold values

to default values.

To set both the upper and lower fan warning threshold values to the recommended default value, type:

omconfig chassis fans index=0 warnthresh=default