Command Line Interface Guide

Group name=value pair 1 attribute= name=value pair 2 setting=
attribute=Proc3NumCores setting=< integer >
attribute=Proc4Brand setting=< string >
attribute=Proc4Id setting=< string >
attribute=Proc4L2Cache setting=< string >
attribute=Proc4L3Cache setting=< string >
attribute=Proc4NumCores setting=< integer >
attribute=Proc64bit setting=< string >
attribute=ProcAdjCacheLine setting=Enabled | Disabled
attribute=ProcBusSpeed setting=< string >
attribute=ProcCores setting=Single | All | Dual | Quad | 1 | 2 | 4 | 6 | 8 | 10 | 12 |
14 | 16
attribute=ProcCoreSpeed setting=< string >
attribute=ProcExecuteDisable setting=Enabled | Disabled
attribute=ProcHwPrefetcher setting=Enabled | Disabled
attribute=ProcVirtualization setting=Enabled | Disabled
attribute=QpiBandwidthPriority setting=InputOutput | Compute
attribute=QpiSpeed setting=MaxDataRate | 8GTps | 7GTps | 6GTps
attribute=RtidSetting setting=Enabled | Disabled
attribute=EmbSata setting=Off | AtaMode | RaidMode | AhciMode
attribute=eSataPort1 setting=Off | Auto
attribute=eSataPort1Capacity setting=< string >
attribute=eSataPort1DriveType setting=< string >
attribute=eSataPort1Model setting=< string >
attribute=SataPortA setting=Off | Auto
attribute=SataPortACapacity setting=< string >
attribute=SataPortADriveType setting=< string >
attribute=SataPortAModel setting=< string >
attribute=SataPortB setting=Off | Auto
attribute=SataPortBCapacity setting=< string >
attribute=SataPortBDriveType setting=< string >
attribute=SataPortBModel setting=< string >
attribute=SataPortC setting=Off | Auto
attribute=SataPortCCapacity setting=< string >
77