Command Line Interface Guide

Table 22. BIOS Setup Settings On PowerEdge 12G Systems

Group name=value pair 1 attribute= name=value pair 2 setting=

BIOS Boot Settings attribute=BootSeq sequence=aliasname1, aliasname2,..... aliasnameN

attribute=HddSeq sequence=aliasname1, aliasname2,..... aliasnameN

Boot Settings attribute=BootMode setting=Bios | Uefi

attribute=BootSeqRetry setting=Enabled | Disabled

Embedded Server

Management

attribute=FrontLcd setting=None | UserDefined | ModelNum | Advanced

attribute=UserLcdStr setting=<

string

Integrated Devices attribute=EmbVideo setting=Enabled | Disabled

attribute=IntegratedNetwork1 setting=Enabled | DisabledOs

attribute=IntegratedNetwork2 setting=Enabled | DisabledOs

attribute=IntegratedRaid setting=Enabled | Disabled

attribute=IntegratedSas setting=Enabled | Disabled

attribute=InternalSdCard setting=On | Off

attribute=InternalSdCardRedundanc

setting=Mirror | Disabled

attribute=InternalUsb setting=On | Off

attribute=InternalUsb1 setting=On | Off

attribute=InternalUsb2 setting=On | Off

attribute=IoatEngine setting=Enabled | Disabled

attribute=OsWatchdogTimer setting=Enabled | Disabled

attribute=SriovGlobalEnable setting=Enabled | Disabled

attribute=UsbPorts setting=AllOn | OnlyBackPortsOn | AllOff

Memory Settings attribute=MemOpMode setting=OptimizerMode | SpareMode | MirrorMode |

AdvEccMode | SpareWithAdvEccMode

attribute=MemOpVoltage setting=AutoVolt | Volt15V

NOTE: Volt15V represents 1.5 Volt.

attribute=MemTest setting=Enabled | Disabled

attribute=NodeInterleave setting=Enabled | Disabled

attribute=SerialDbgOut setting=Enabled | Disabled

attribute=SysMemSize setting=<

string

attribute=SysMemSpeed setting=<

string

attribute=SysMemType setting=<

string