Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
console redirection through
COM1.
• com2: Enables serial
communication setting with
console redirection through
COM2.
• onwithconsole: Enables serial
communication with console
redirection through COM1 and
COM2.
NOTE: The setting
onwithconsole is
supported only on Dell
blade systems.
attribute=serialport1 setting=off | auto | com1 | com3 |
bmcserial | bmcnic | rac | com1bmc
• off: Disables serial port 1.
• auto: Maps serial port 1 to a
COM port.
• com1: Maps serial port 1 to
COM port 1.
• com3: Maps serial port 1 to
COM port 3.
• bmcserial: Maps serial port 1
to BMC Serial.
• bmcnic: Maps serial port 1 to
the Baseboard Management
Controller (BMC) NIC.
• rac: Maps serial port 1 to the
Remote Access Controller
(RAC.)
• com1bmc: Maps serial port 1
to COM port 1 bmc.
NOTE: This command is
applicable only on selected x8xx
systems.
attribute=serialport2 setting=off | auto | com2 | com4
• off: Disables serial port 2.
• auto: Maps serial port 2 to a
COM port.
• com2: Maps serial port 2 to
COM port 2.
• com4: Maps serial port 2 to
COM port 4.
attribute=speaker setting=on | off
• on: Enables the speaker.
• off: Disables the speaker.
attribute=cputurbomode setting=enabled | disabled
CPU turbo mode can increase the CPU
frequency when the system is
operating below the thermal, power,
or current limits.
73