Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
attribute=romba setting=raid | scsi force=true
• raid: Instructs the BIOS to
detect RAID-on-motherboard
channel A as a RAID device.
• scsi: Instructs the BIOS to
detect the RAID-on-
motherboard device as a SCSI
device.
• force=true: Verification of
setting change.
attribute=rombb setting=raid | scsi force=true
• raid: Instructs the BIOS to
detect RAID-on-motherboard
channel B as a RAID device.
• scsi: Instructs the BIOS to
detect the RAID-on-
motherboard device as a SCSI
device.
• force=true: Verification of
setting change.
attribute=sata setting=off | ata | raid
• off: Disables the SATA
controller.
• ata: Sets the onboard SATA
controller to ATA mode.
• raid: Sets the onboard SATA
controller to RAID mode.
attribute=sataport (0...7) or (a...h) setting=off | auto
• off: Disables the SATA port.
• auto: Automatically enables
the SATA port.
attribute=secondaryscsi setting=on | off
• on: Enables secondary SCSI.
• off: Disables this device.
attribute=serialportaddr setting=default | alternate | com1 |
com2
• default: Maps to Serial
device1=COM1, Serial
device2=COM2.
• alternate: Maps to Serial
device1=COM2, Serial
device2=COM1
• com1: Sets serial port address
to COM1.
• com2: Sets serial port address
to COM2.
attribute=serialcom setting=off | on | com1 | com2 |
onwithconsole
• off: Disables serial
communication setting.
• on: Enables serial
communication setting
without console redirection.
• com1: Enables serial
communication setting with
72