Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• enablednonepxe: Enables the
second NIC during system
boot (with PXE off if the
system has PXE).
• enabledwithiscsi: Enables the
second NIC during system
boot (with iSCSI on if the
system has iSCSI).
attribute=nic3 setting=enabled | enabledwithpxe |
disabled | enabledonly |
enablednonepxe | enabledwithiscsi
• enabled: Enables the third NIC
during system boot.
• enabledwithpxe: Enables the
third NIC during system boot
(with PXE on if the system has
PXE).
• disabled: Disables the third
NIC during system boot.
• enabledonly: Enables the third
NIC during system boot (with
PXE off if the system has PXE).
• enablednonepxe: Enables the
third NIC during system boot
(with PXE off if the system has
PXE).
• enabledwithiscsi: Enables the
third NIC during system boot
(with iSCSI on if the system
has iSCSI).
attribute=nic4 setting=enabled | enabledwithpxe |
disabled | enabledonly |
enablednonepxe | enabledwithiscsi
• enabled: Enables the fourth
NIC during system boot.
• enabledwithpxe: Enables the
fourth NIC during system boot
(with PXE on if the system has
PXE).
• disabled: Disables the fourth
NIC during system boot.
• enabledonly: Enables the
fourth NIC during system boot
(with PXE off if the system has
PXE).
• enablednonepxe: Enables the
fourth NIC during system boot
(with PXE off if the system has
PXE).
• enabledwithiscsi: Enables the
fourth NIC during system boot
(with iSCSI on if the system
has iSCSI).
attribute=numlock setting=on | off
• on: Uses the keypad as
number keys.
• off: Uses the keypad as arrow
keys.
70