Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• auto: Detects and enables the
device automatically.
attribute=intrusion setting=enabled | disabled
• enabled: Enables the intrusion
check during system boot. If
the system also has bezel
intrusion checking, then the
intrusion option checks for
removal of the bezel of the
system.
• disabled: Disables the
intrusion check during system
boot.
attribute=intusb[1..2]
NOTE: The following option is
deprecated: attribute=intusb
setting=enabled | disabled
• enabled: Enables the internal
USB port.
• disabled: Disables the internal
USB port.
attribute=mouse setting=on | off
• on: Enables the mouse.
• off: Disables the mouse.
attribute=nic1 setting=enabled | enabledwithpxe |
disabled | enabledonly |
enablednonepxe | enabledwithiscsi
• enabled: Enables the first NIC
during system boot.
• enabledwithpxe: Enables the
first NIC during system boot
(with PXE on if the system has
PXE).
• disabled: Disables the first
NIC during system boot.
• enabledonly: Enables the first
NIC during system boot (with
PXE off if the system has PXE).
• enablednonepxe: Enables the
first NIC during system boot
(with PXE off if the system has
PXE).
• enabledwithiscsi: Enables the
first NIC during system boot
(with iSCSI on if the system
has iSCSI).
attribute=nic2 setting=enabled | enabledwithpxe |
disabled | enabledonly |
enablednonepxe | enabledwithiscsi
• enabled: Enables the second
NIC during system boot.
• enabledwithpxe: Enables the
second NIC during system
boot (with PXE on if the
system has PXE).
• disabled: Disables the second
NIC during system boot.
• enabledonly: Enables the
second NIC during system
boot (with PXE off if the
system has PXE).
69