Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• disabled: Disables the
embedded hypervisor.
attribute=embvideoctrl setting=enabled | disabled
• enabled: Enables the
embedded video controller as
the primary video device.
• disabled: Disables the
embedded video controller as
the primary video device.
attribute=esataport setting=off | auto
• off: Sets the embedded SATA
port value to off.
• auto: Sets the embedded
SATA port value to auto.
attribute=extserial setting=com1 | com2 | rad
• com1: Maps the external
serial connector to COM 1.
• com2: Maps the external
serial connector to COM 2.
• rad: Maps the external serial
connector to the remote
access device.
attribute=fbr setting=9600 | 19200 | 57600 | 115200
• 9600: Sets the console
redirection failsafe baud rate
to 9600 bits per second.
• 19200: Sets the console
redirection failsafe baud rate
to 19200 bits per second.
• 57600: Sets the console
redirection failsafe baud rate
to 57600 bits per second.
• 115200: Sets the console
redirection failsafe baud rate
to 115200 bits per second.
attribute=htassist setting=enabled | disabled
• enabled: Enables the probe
filter chipset option.
• disabled: Disables the probe
filter chipset option.
NOTE: Certain applications do not
function fully if you enable or
disable this option.
attribute=ide setting=on | off force=true
• on: Enables IDE.
• off: Disables IDE.
• force=true: Verification of
setting change.
attribute=idepridrv setting=off | auto
• off: Disables the device.
68