Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• disable: Disables DBS on the
system.
attribute=diskette setting=off | auto | writeprotect
• off: Disables the diskette
drive.
• auto: Auto-enables the
diskette drive.
• writeprotect: The diskette
drive is available in read-only
format only. Makes the
diskette drive read-only.
attribute=dualnic setting=off | on | pxeboth | nic1pxe |
nic2pxe | isciboth | nic1isci | nic2isci |
nic1pxenic2isci | nic1iscinic2pxe |
onpxeboth | onpxenone | onpxenic1 |
onpxenic2
• off: Disables the Network
Interface Controllers (NICs).
• on: Enables the network
interface (PXE or iSCSI is not
enabled on either of the NICs).
• pxeboth: Enables PXE on both
NICs.
• nic1pxe: Enables PXE on the
first NIC and none (no PXE or
iSCSI) on the second NIC.
• nic2pxe: Enables none (no
PXE or iSCSI) on first NIC and
PXE on the second NIC.
• isciboth: Enables iSCSI on
both the NICs.
• nic1isci: Enables iSCSI on the
first NIC and none (no PXE or
iSCSI) on the second NIC.
• nic2isci: Enables none (no PXE
or iSCSI) on the first NIC and
iSCSI on the second NIC.
• nic1pxenic2isci: Enables PXE
on the first NIC and iSCSI on
second NIC.
• nic1iscinic2pxe: Enables iSCSI
on the first NIC and PXE on
second NIC.
The following options are deprecated:
• onpxeboth: Enables PXE on
both the NICs.
• onpxenone: PXE is not
enabled on either of the NICs.
• onpxenic1: Enables PXE on
NIC 1.
• onpxenic2: Enables PXE on
NIC 2.
attribute=embhypvisor setting=enabled | disabled
• enabled: Enables the
embedded hypervisor.
67