Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
attribute=crab setting=enabled | disabled
• enabled: Enables BIOS
console redirection after
system reboot.
• disabled: Disables BIOS
console redirection.
NOTE: The attribute crab is valid
for Dell PowerEdge 9G systems
only.
attribute=cpucle setting=enabled | disabled
• enabled: Enables processor
C1-E after system reboot.
• disabled: Disables processor
C1-E after system reboot.
attribute=cpuht setting=enabled | disabled
• enabled: Enables logical
processor hyperthreading.
• disabled: Disables logical
processor hyperthreading.
attribute=cpuvt setting=enabled | disabled
• enabled: Enables
virtualization.
• disabled: Disables
virtualization.
attribute=cpuxdsupport setting=enabled | disabled
• enabled: Enables Execute
Disable (XD) support on the
system.
• disabled: Disables XD support
on system.
attribute=cpucore setting=1 | 2 | 4 | 6 | 8 | 10 | 12 |all
• 1: Enables one core per
processor.
• 2: Enables two cores per
processor.
• 4: Enables four cores per
processor.
• 6: Enables six cores per
processor.
• 8: Enables eight cores per
processor.
• 10: Enables ten cores per
processor.
• 12: Enables twelve cores per
processor.
• all: Enables the maximum
cores per processor.
attribute=dbs setting=enable | disable
• enable: Enables Demand
Based Switching (DBS) on the
system.
66