Command Line Interface Guide

Omreport System Shutdown Or Omreport Servermodule Shutdown
Use the omreport system shutdown or omreport servermodule shutdown command to view any pending shutdown
actions for the system. If properties for shutdown are configured, executing this command displays these properties.
NOTE: Due to the limitations of certain operating systems (for example, VMware ESXi), certain features are not
available with this release of OpenManage Server Administrator.
Omreport System Summary Or Omreport Servermodule Summary
Use the omreport system summary or omreport servermodule summarycommand to view a comprehensive summary of
software and hardware components currently installed on the system. Type:
omreport system summary
or
omreport servermodule summary
NOTE: If the vFlash or SD card size is less than 1 GB, the size is displayed in MB.
NOTE: If iDRAC is installed, Server Administrator displays the LCC version. If BMC is installed, Server Administrator
displays the USC version.
The output that is displayed in the CLI window depends on the systems management software, operating system, and
hardware components and options installed on the system. The following partial command results are unique and may
not resemble the hardware and software configuration of the system:
System Summary
-----------------
Software Profile
-----------------
Systems Management
Name : Dell OpenManage Server Administrator
Version : x.x.x
Description : Systems Management Software
Contains : Common Storage Module 4.x.x
: Data Engine 7.x.x
: Hardware Application Programming Interface 7.x.x
: Instrumentation Service 7.x.x
: Instrumentation Service Integration Layer 7.0.0
: OpenManage Inventory Collector 7.x.x
: Remote Access Controller Data Populator 7.x.x
: Remote Access Controller Managed Node 7.x.x
: Secure Port Server 7.x.x
: Server Administrator Common Framework 7.x.x
51