Command Line Interface Guide

The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of status,
readings, and thresholds set for any voltage probes that are present on the system. If you specify the index, Server
Administrator displays a summary for a specific voltage probe.
Omreport Licenses
Use the omreport licenses command to view the digital licenses of the hardware devices installed on the system. Type:
omreport licenses
The following is an example output from the omreport licenses command:
Device Index : 0
Device Status : Ok
Device : iDRAC7
Device Description : iDRAC
Device ID : xxxx
License Index : 0
Description : iDRAC7 Enterprise Evaluation License
Status : OK
Recommended Action : N/A
License Type : Evaluation
EntitlementID : xxxx
Expiry Date : yyyy-mm-dd hh:mm:ss
Omreport System Commands Or Omreport Servermodule
Commands
Use the omreport system or omreport servermodule commands to view logs, threshold values, cost of ownership
information, and information about how shutdown actions and recovery actions are configured.
Omreport System Or Omreport Servermodule
Use the omreport system or omreport servermodule command to see a general status of the components of the system.
When you specify a level 3 command, such as omreport system shutdown or omreport servermodule shutdown, you get
detailed information for one system component rather than the high-level status obtained with omreport system or
omreport servermodule. Type:
omreport system
or
omreport servermodule
If the system has both a main system chassis or main system and at least one direct attached storage device, Server
Administrator may display a summary that resembles the following example:
44