Command Line Interface Guide

Connector Name : DIMM_A3

Type : DDR3 - Synchronous Registered

(Buffered)

Size : 8192 MB

Index : 3

Status : Ok

Connector Name : DIMM_A4

Type : DDR3 - Synchronous Registered

(Buffered)

Size : 8192 MB

If you specify the index, Server Administrator displays a summary for a specific memory module displaying the health,

status, device name, type, speed, rank, and failures. A rank is a row of dynamic random access memory (DRAM) devices

comprising 64 bits of data per Dual Inline Memory Module (DIMM). The possible values of rank are single, dual,

quad, octal,

and hexa. The rank displays the rank of the DIMM and helps in the easy service of DIMMs on the

server.

The following is an example output if you specify the index:

Memory Device Information

Health : Ok

Status : Ok

Device Name : DIMM_A1

Size : 8192 MB

Type : DDR3 Synchronous Registered (Buffered)

Speed : 0.75 ns

Rank : Dual

Failures : None

NOTE: To maintain consistency across the commands, the output format of this command and the subsequent

command levels has changed. Change the user scripts as applicable.

Omreport Chassis Nics Or Omreport Mainsystem Nics

Use the omreport chassis nics or omreport mainsystem nics command to view NIC and Team interface details. On

XenServer, the command displays all the installed NICs, regardless of driver installation.

NOTE: The order in which devices are detected is not guaranteed to match the physical port ordering of the device.

To view NIC properties, type:

omreport chassis nics index=n