Command Line Interface Guide

Command
Level 1
Command Level 2 Command Level
3
User
Privilege
Required
Use
hwperformance U, P, A Displays the status and cause for the system’s
performance degradation.
info U, P, A Displays a status summary for main system
chassis components.
intrusion U, P, A Displays the status of the system’s intrusion
sensor(s).
leds U, P, A Displays the properties you have set for light-
emitting diodes to flash under various alert
conditions.
memory U, P, A Displays properties of the system's memory
arrays.
nics U, P, A Displays the NIC and Team interface properties.
ports U, P, A Displays the properties for the system’s parallel
and serial ports, such as I/O address, IRQ level,
connector type, and maximum speed.
processors U, P, A Displays properties of the system’s processors,
including speed, manufacturer, and processor
family.
pwrmanagemen
t
U, P, A Displays power inventory details such as system
idle power, system maximum potential power,
and power budget information.
pwrmonitoring U, P, A Displays properties of power consumption.
pwrsupplies U, P, A Displays the properties of power supplies.
remoteaccess U, P, A Displays general information on remote access.
slots U, P, A Displays the properties of the system’s
expansion slots and other slot types.
temps U, P, A Displays the status and thresholds for the system
temperature sensors.
volts U, P, A Displays the status and thresholds for the system
voltage sensors.
removableflash
media
U, P, A Displays the system’s virtual flash (vFlash) and
secure digital (SD) card details.
licenses U, P, A Displays the digital licenses of the installed
hardware devices of the system.
storage U, P, A See Using The Storage Management Service.
system or
servermodule
U, P, A Displays a high-level summary of system
components.
21