Command Line Interface Guide

storage cachecade controller=ID to display the IDs for the cachecades of the
controller.
In some circumstances, you may receive a warning message. You can override this
warning by using the force=yes parameter. In this case, the syntax is as follows:
omconfig storage cachecade action=deletecachecade
controller=id cachecade=id force=yes
Example to Delete cachecade 4 on controller 1.
Example
omconfig storage cachecade action=deletecachecade
controller=1 cachecade=4
Omconfig Resize Cachecade
Description Resizes a cachecade by adding or removing physical disks.
Syntax
omconfig storage cachecade action=resize controller=id
cachecade=id pdisk=<PDISKID>, where id is the controller ID and the
cachecade ID as reported by the omreport command. To obtain these values, type
omreport storage controller to display the controller IDs and then type
omreport storage cachecade controller=ID to display the IDs for the
cachecades of the controller.
Example to Resize cachecade 4, use physical disks 0 through 3 on connector 0 of controller 1.
Example for SAS
controllers
omconfig storage cachecade action=resize controller=1
cachecade=4 pdisk= 0:2:0,0:2:1,0:2:2,0:2:3
Example for SCSI, SATA,
and ATA controllers
omconfig storage cachecade action=resize controller=1
cachecade=4 pdisk=0:0,0:1,0:2,0:3
Omconfig Rename Cachecade
Description Renames a cachecade.
Syntax
omconfig storage cachecade action=rename controller=id
cachecade=id name=<string>, where id is the controller ID and the cachecade
ID as reported by the omreport command. To obtain these values, type omreport
storage controller
to display the controller IDs and then type omreport
storage cachecade controller=ID to display the IDs for the cachecades of the
controller.
Example to Rename cachecade 4 on controller 1 to cc4.
Example
omconfig storage cachecade action=rename controller=1
cachecade=4 name=cc4
Omconfig PCIe SSD Commands
The following table displays the omconfig command syntax required to execute PCIe SSD tasks.
181