Command Line Interface Guide

Example
omconfig storage controller action=disablealarm controller=1
Omconfig Quiet Controller Alarm
Table 91. omconfig Quiet Controller Alarm
Description Silences an activated controller alarm. For more information, see the Dell OpenManage
Online Help .
Syntax omconfig storage controller action=quietalarm controller=id,
where id is the controller ID as reported by the omreport storage controller command.
Example to Quiet the alarm on controller 1.
Example
omconfig storage controller action=quietalarm controller=1
omconfig Test Controller Alarm
Table 92. omconfig Test Controller Alarm
Description Tests the functionality of the controller alarm. The alarm sounds for about two seconds. For
more information, see Dell OpenManage Online Help .
Syntax omconfig storage controller action=testalarm controller=id ,
where id is the controller ID as reported by the omreport storage controller command.
Example to Test the alarm on controller 1.
Example
omconfig storage controller action=testalarm controller=1
Omconfig Reset Controller Configuration
Description Resets the controller configuration.
CAUTION: Resetting a configuration permanently destroys all data on all
virtual disks attached to the controller. System or boot partition residing on
these virtual disks is destroyed. You may receive a warning message if this
command results in deleting the system or boot partition. However, this
warning message is not generated always. Ensure that you do not delete
the system or boot partition or other vital data when using this command.
Syntax
omconfig storage controller action=resetconfig
controller=id, where id is the controller ID as reported by the omreport
storage controller command.
In some circumstances, you may receive a warning message if this command
deletes the system or boot partition. You can override this warning by using the
force=yes parameter. In this case, the syntax is as follows:
omconfig storage controller action=resetconfig
controller=id force=yes
Example to Reset the configuration on controller 1.
Example
omconfig storage controller action=resetconfig
controller=1
omconfig Create Virtual Disk
The Dell OpenManage Online Help provides additional information about creating virtual disks.
160