Command Line Interface Guide

Omconfig Disable Fluid Cache on Virtual Disk
Description Disables fluid cache for the specified virtual disk.
Syntax
omconfig storage vdisk action=disablefluidcache controller=id
vdisk=id devicename=<string>, where id is the controller ID and virtual disk ID
as reported by the omreportcommand and <string> is the device name of the virtual disk.
To obtain the values for controller ID and virtual disk ID, type
omreport storage
controller to display the controller IDs and then type omreport storage vdisk
controller=ID
to display the IDs for the virtual disks attached to the controller.
Example to Disable fluid cache on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=disablefluidcache controller=1
vdisk=4 devicename=/dev/sdb
Omconfig Reactivate Fluid Cache on Virtual Disk
Description Reactivates the fluid cache for the specified virtual disk.
Syntax
omconfig storage vdisk action=reactivate controller=id
vdisk=id devicename=<string>, where id is the controller ID and virtual disk ID
as reported by the omreportcommand and <string> is the device name of the virtual disk.
To obtain the values for controller ID and virtual disk ID, type
omreport storage
controller to display the controller IDs and then type omreport storage vdisk
controller=ID
to display the IDs for the virtual disks attached to the controller.
Example to Reactivate fluid cache on virtual disk 4 on controller 1
Example
omconfig storage vdisk action=reactivate controller= 1
vdisk=4 devicename=/dev/sdb
Omconfig Controller Commands
The following table provides the omconfig command syntax required to execute controller tasks.
CAUTION: The omconfig storage controller action=resetconfig controller=id resets the controller configuration.
Resetting the controller configuration permanently destroys all data on all virtual disks attached to the controller.
System or boot partition residing on these virtual disks is destroyed.
Table 90. Omconfig Controller Commands
Required Command Levels (1,
2, 3)
Optional name=value pairs
omconfig storage controller action=rescan controller=id
action=enablealarm controller=id
action=disablealarm controller=id
action=quietalarm controller=id
action=testalarm controller=id
action=resetconfig controller=id [force=yes]
action=createvdisk controller=id raid=<c | r0 | r1| r1c | r5 | r6 | r10 | r50 | r60>
size=<number | b | m | g | max | min> pdisk=<PDISKID> [stripesize=< 2kb | 4kb | 8kb |
157