Command Line Interface Guide

Omconfig Unblink Virtual Disk
Description
Unblinks the physical disks included in a virtual disk.
Syntax omconfig storage vdisk action=unblink controller=id vdisk=id,
where id is the controller ID and virtual disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Unblink the physical disks in virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=unblink controller=1 vdisk=4
Omconfig Initialize Virtual Disk
Description
Initializes a virtual disk.
Syntax
omconfig storage vdisk action=initialize controller=id
vdisk=id, where id is the controller ID and virtual disk ID as reported by the omreport
command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the IDs for
the virtual disks attached to the controller.
Example to Initialize virtual disk 4 on controller 1
Example
omconfig storage vdisk action=initialize controller=1 vdisk=4
Omconfig Fast Initialize Virtual Disk
Description Fast initializes a virtual disk.
CAUTION: You may receive a warning message if you attempt to delete the system or
boot partition. However, this warning message is not generated always. Ensure that
you do not delete the system or boot partition or other vital data when using this
command.
Syntax
omconfig storage vdisk action=fastinit controller=id
vdisk=id, where id is the controller ID and virtual disk ID as reported by the omreport
command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the IDs for
the virtual disks attached to the controller.
NOTE: In some circumstances, you may receive a warning message if this command
deletes the system or boot partition. You can override this warning by using the
force=yes parameter. In this case, the syntax is as follows:
omconfig storage vdisk action=fastinit controller=id
vdisk=id force=yes
Example to Fast initialize virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=fastinit controller=1 vdisk=4
151