Command Line Interface Guide

Example
omconfig storage vdisk action=cancelcheckconsistency
controller=1 vdisk=4
Omconfig Pause Check Consistency
Description
Pauses a check consistency while in progress. For more information, see the Dell
OpenManage Online Help .
Syntax
omconfig storage vdisk action=pausecheckconsistency
controller=id vdisk=id , where id is the controller ID and virtual disk ID as
reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the
IDs for the virtual disks attached to the controller.
Example to Pause a check consistency on virtual disk 4 on controller 1
Example
omconfig storage vdisk action=pausecheckconsistency
controller=1 vdisk=4
Omconfig Resume Check Consistency
Description
Resumes a check consistency after it has been paused.
Syntax
omconfig storage vdisk action=resumecheckconsistency
controller=id vdisk=id, where id is the controller ID and virtual disk ID as
reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the IDs for
the virtual disks attached to the controller.
Example to Resume a check consistency on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=resumecheckconsistency
controller=1 vdisk=4
Omconfig Blink Virtual Disk
Description
Blinks the physical disks included in a virtual disk.
Syntax omconfig storage vdisk action=blink controller=id vdisk=id,
where id is the controller ID and virtual disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the IDs for
the virtual disks attached to the controller.
Example to Blink the physical disks in virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=blink controller=1 vdisk=4
150