Command Line Interface Guide

Example to Cancel the clear of physical disk 3 on connector 0 of
controller 1. On a SAS controller, the physical disk resides
in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk
action=cancelclear controller=1
pdisk=0:2:3
Omconfig Enable Device Write Cache
Description
Enables write cache on a physical disk for the PCIe SSD
controller.
Syntax
omconfig storage pdisk
action=enabledevicewritecache
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies the
physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
Example to Enable write cache on physical disk 3 on connector 0 of
controller 1. On a SAS controller, the physical disk resides
in enclosure 2.
Example for SAS controllers
omconfig storage pdisk
action=enabledevicewritecache
controller=1 pdisk=0:2:3
Omconfig Disable Device Write Cache
Description
Disables write cache on a physical disk for the PCIe SSD
controller.
Syntax
omconfig storage pdisk
action=disabledevicewritecache
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies the
physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
Example to Disable write cache on physical disk 3 on connector 0 of
controller 1. On a SAS controller, the physical disk resides
in enclosure 2.
Example for SAS controllers
omconfig storage pdisk
action=disabledevicewritecache
controller=1 pdisk=0:2:3
146