Command Line Interface Guide

Omconfig Cancel Replace Member
Description
Cancels a replace member operation.
Syntax
omconfig storage pdisk
action=cancelreplacemember
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies the
physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
Example to Cancel replace member operation on disk 0:0:1 which is
connected to controller 0
Example
omconfig storage pdisk
action=cancelreplacemember controller=0
pdisk=0:0:1
Omconfig Clear Physical Disk
Description
Clears data or a configuration from a physical disk.
Syntax
omconfig storage pdisk action=clear
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies the
physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
Example to Clear physical disk 3 on connector 0 of controller 1. On a
SAS controller, the physical disk resides in enclosure 2.
Example for SAS controllers
omconfig storage pdisk action=clear
controller=1 pdisk=0:2:3
Omconfig Cancel Clear Physical Disk
Description
Cancels a clear operation in progress on a physical disk.
Syntax
omconfig storage pdisk
action=cancelclear controller=id
pdisk=<PDISKID>, where id is the controller ID. The
<PDISKID> variable specifies the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the
IDs for the physical disks attached to the controller.
145