Command Line Interface Guide

8
Omconfig Storage Commands
The omconfig commands allows you to configure physical disks, virtual disks, controllers, enclosures, batteries, global
information, connectors, and cachecades.
To see a list of valid commands for omconfig storage, type:
omconfig storage -?
The following table provides the omconfig storage command syntax:
Table 86. Omconfig Storage Help
Command Level
1
Command Level
2
Command Level 3 Use
omconfig
storage Sets the storage component properties for which omconfig
commands are available.
pdisk Displays the list of omconfig storage pdisk parameters for
configuring physical disks.
vdisk Displays the list of omconfig storage vdisk parameters for
configuring virtual disks.
controller Displays a list of the omconfig storage controller parameters
for configuring controllers.
enclosure Displays a list of the omconfig storage controller parameters
for configuring enclosures.
battery Displays a list of the omconfig storage battery parameters for
configuring batteries.
globalinfo Displays a list of the omconfig storage globalinfo parameters
for configuring global storage properties.
connector Displays a list of the omreport storage connector parameters
for configuring connectors.
cachecade Displays a list of the omconfig storage cachecade parameters
for configuring cachecades.
fluidcache Displays the fluid cache properties and the associated fluid
cache disks.
fluidcachepool Displays the fluid cache pool properties.
partition Displays the partition details of the specified controller and
virtual disk.
fluidcachedisk Displays the fluid cache disk properties.
139