Command Line Interface Guide

Required Command
Levels (1, 2, 3)
Optional name=value pairs Use
Example for SCSI controllers: controller=0
enclosure=2. Example for SAS controllers:
controller=0 enclosure=1:2.
Omreport Temperature Probe Status
The following table describes the syntax for the omreport Probe commands
Table 71. Omreport Temperature Probe Commands
Required Command Levels (1, 2, 3)
and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id
enclosure=<ENCLOSUREID>
info=temps where id is the controller
number and <ENCLOSUREID> is the
enclosure ID. Example for SCSI
controllers: controller=0 enclosure=2
info=temps. Example for SAS
controllers: controller=0 enclosure=1:2
info=temps
Displays the temperature probes for
the specified enclosure.
controller=id
enclosure=<ENCLOSUREID>
info=temps index=n where id is the
controller number and
<ENCLOSUREID> is the enclosure
number and n is the number of a
temperature probe. For example:
controller=0 enclosure=2 info=temps
index=1
Displays the temperature probes for
the specified enclosure.
Omreport Fan Status
The following table describes the syntax for the omreport Fan commands
Table 72. Omreport Fan Status
Required Command Levels (1, 2, 3)
and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id
enclosure=<ENCLOSUREID> info=fans
where id is the controller number and
ENCLOSUREID is the enclosure
Displays the fans for the specified
enclosure.
132