Command Line Interface Guide

7
Omreport Storage Commands
The omreport command allows you to view storage component information for disks, controllers, enclosures, batteries,
global storage properties, connectors and cachecades that are part of the storage system. The omreport command
helps to get reports with the level of detail that you want.
The commands may vary in, whether they define the fields that appear in the results of a particular omreport command.
Fields are defined only if they have a special or less familiar use.
The following sections provide the omreport command syntax required to display the information of various storage
components.
To see a list of valid commands for omreport storage, type:
omreport storage -?
The following table provides the omreport storage command syntax.
Table 66. Omreport Storage Help
Command Level
1
Command Level
2
Command Level
3
Use
omreport storage Displays a list of storage components for which omreport
commands are available.
pdisk Displays a list of the omreport storage pdisk parameters for
displaying physical disk information.
vdisk Displays a list of omreport storage vdisk parameters for
displaying virtual disk information.
controller Displays a list of the omreport storage controller parameters
for displaying controller information.
enclosure Displays a list of the omreport storage enclosure parameters
for displaying enclosure information.
battery Displays a list of the omreport storage battery parameters for
displaying battery information.
globalinfo Displays a list of the omreport storage globalinfo parameters
for displaying global storage property information.
connector Displays a list of the omreport storage connector parameters
for displaying connector information.
cachecade Displays a list of the omreport storage cachecade parameters
for displaying cachecade properties.
pciessed Displays the properties of the PCIe SSD subsystem.
fluidcache Displays the fluid cache properties and the associated fluid
cache disks.
129