Command Line Interface Guide

Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
providerfee=< providerfee > Amount of money
charged for
maintenance.
servicefee=< servicefee > Amount of money
charged for service.
signauth=< name > Person who signed or
authorized the
service.
Example Command For Adding Outsource Information
To provide a value for an outsource parameter, type a command of the form: omconfig system assetinfo info=outsource
<name=value pair 2> or omconfig servermodule assetinfo info=outsource <name=value pair 2>. For example, type:
omconfig system assetinfo info=outsource providerfee=75
or
omconfig servermodule assetinfo info=outsource providerfee=75
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command at the same time,
as long as all the parameters for name=value pair 2 belong to the same name=value pair 1.
For an example, see Example Command For Adding Acquisition Information.
Adding Owner Information
The owner is the party that holds legal property title to the system. The following table displays the valid parameters for
adding owner information.
Table 59. Valid Parameters Of omconfig system assetinfo info=owner Or omconfig servermodule assetinfo info=owner
Command
Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description
omconfig system or
servermodule
assetinfo info=owner insuranceco=< company > Name of the insurance
company that insures the
system.
ownername=< business > Business entity that owns
the system.
type=owned | leased | rented Whether the user of the
system owns, leases, or
rents the system.
119