Command Line Interface Guide

Adding Extended Warranty Information
Use the omconfig system extwarranty or omconfig servermodule extwarranty command to assign values for extended
warranty information. A warranty is a contract between the manufacturer or dealer and the purchaser of a system. The
warranty identifies the components that are covered for repair or replacement for a specified length of time or usage.
The extended warranty comes into force after the original warranty expires. For details on how to edit warranty values,
see Adding Warranty Information.
The following table displays the valid parameters for the command
Table 55. Valid Parameters Of omconfig system assetinfo info=extwarranty Or omconfig servermodule assetinfo
info=extwarranty
Command
Level 1
Command Level 2 Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
omconfig system or
servermodule
assetinfo info=extwarranty cost=< cost > Cost of the extended
warranty service.
enddate=< enddate > Date the extended
warranty agreement
ends.
provider=< provider > Business entity that
provides the extended
warranty service.
startdate=< startdate > Date the extended
warranty service
begins.
Example Command For Adding Extended Warranty Information
To provide a value for an extended warranty parameter, type a command of the form: omconfig system assetinfo
info=extwarranty <name=value pair 2> or omconfig servermodule assetinfo info=extwarranty <name=value pair 2>. For
example, type:
omconfig system assetinfo info=extwarranty enddate=012503
or
omconfig servermodule assetinfo info=extwarranty enddate=012503
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command at the same time,
as long as all the parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example
Command For Adding Acquisition Information.
Adding Lease Information
A lease is an agreement to pay for the use of a system for a specified period of time. The lessor retains ownership of the
system. The following table displays the valid parameters for the command.
116