Command Line Interface Guide

Command
Level 1
Command Level
2
Command Level
3
Name= Value
Pair 1
Name= Value Pair 2 Description
development or
sales.
installdate=< mmddyy > Date the system
was put to service.
ponum=< n > Number of the
document that
authorized
payment for the
system.
purchasecost=< n > Price the owner
paid for the
system.
purchasedate=< mmddyy
>
Date the owner
purchased the
system.
signauth=< text > Name of the
person who
approved the
purchase or the
service call on the
system.
waybill=< n > Receipt from the
carrier for the
goods received.
Example Command For Adding Acquisition Information
To provide a value for an acquisition parameter, type a command of the form: omconfig system assetinfo
info=acquisition <name=value pair 2> or omconfig servermodule assetinfo info=acquisition <name=value pair 2>. For
example, type:
omconfig system assetinfo info=acquisition purchasedate=122101
or
omconfig servermodule assetinfo info=acquisition purchasedate=122101
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command at the same time,
as long as all of the parameters for name=value pair 2 belong to the same name=value pair 1. For example, to type more
than one parameter value for info=acquisition, use the following example as a syntax guide:
omconfig system assetinfo info=acquisition purchasecost=5000
waybill=123456 installdate=120501 purchasedate=050601 ponum=9999 signauth="John
Smith" expensed=yes costcenter=finance
114