Command Line Interface Guide

Event Name Description
event=powerwarn Sets action or enables or disables alert generation when a power device probe
detects that the power supply, voltage regulator module, or DC to DC converter
is pending a failure condition.
event=powerabsent Sets action or enables or disables alert generation when a processor probe
detects that the power supply is absent.
event=powerfail Sets action or enables or disables alert generation when a power device probe
detects that the power supply, voltage regulator module, or DC to DC converter
has failed.
event=processorwarn Sets action or enables or disables alert generation when a processor probe
detects that the processor is running at less than peak performance or speed.
event=processorfail Sets action or enables or disables alert generation when a processor probe
detects that the processor has failed.
event=processorabsent Sets action or enables or disables alert generation when a processor probe
detects that the processor is absent.
event=redundegrad Sets action or enables or disables alert generation when the system fans and/or
power supplies become inoperative, resulting in less than full redundancy for
that component.
event=redunlost Sets action or enables or disables alert generation when the system fans and/or
power supplies become inoperative, resulting in a lost or a no redundant
components working condition for that component.
event=systempowerwarn Sets actions when a power consumption probe detects a warning value.
event=systempowerfail Sets actions when a power consumption probe detects a failure value.
event=tempwarn Sets action or enables or disables alert generation when a temperature probe
detects that the temperature is approaching the maximum high or low limits.
event=removableflashmediapresent Sets actions that Server Administrator performs when the system detects a
removable flash media.
event=removableflashmediawarn Sets actions that Server Administrator performs when a removable flash media
warning is displayed.
event=removableflashmediafail Sets actions that Server Administrator performs when a removable flash media
fails.
event=tempfail Sets action or enables or disables alert generation when a temperature probe
detects that the temperature is either too high or low for proper operation.
event=voltfail Sets action or enables or disables alert generation when a voltage probe detects
that the voltage is too low for proper operation.
event=intdualsdcardcritical Sets actions that Server Administrator performs when an internal dual SD card
critical event occurs.
event=intdualsdcardwarn Sets actions that Server Administrator performs when an internal dual SD card
warning is displayed.
event=intdualsdcardabsent Sets actions that Server Administrator performs when an internal dual SD card
is not available.
106