Release Notes

 DF315853: Some Server Administrator CLI commands functions properly only when run
from the elevated console window. It is recommended that you use the elevated console
for running the CLI.
 Due to some limitations, you cannot log on simultaneously to multiple browser
instances/tabs using SSO login, as only one session remains active while the other
sessions expire.
 DF489034: Intel TXT configuration fails due to Virtualization technology dependency
 If the current Virtualization Technology attribute setting is "Disabled" (Virtualization
Technology is part of the Processor Settings group on the BIOS setup page); the Intel TXT
attribute configuration fails on the Server Administrator user interface (System -> Main
System Chassis -> BIOS -> Setup ->System Security.) To resolve this issue, configure
Virtualization technology setting to "Enabled" and reconfigure the Intel TXT attribute, if it is
configurable.
 DF549057: When an operating system is installed through USC, the BIOS attributes in
Server Administrator are displayed as read-only. You can edit the BIOS attributes 18 hours
after the operating system installation.
Workaround: To enable editing of the Server Administrator BIOS attributes, launch
Lifecycle Controller while booting.
 DF552204: On Mozilla Firefox browsers (versions 10, 11 and 12), Server Administrator fails
to launch if IPv6 address is used.
This is a known issue. For more information, see
https://bugzilla.mozilla.org/show_bug.cgi?id=633001.
 BITS04016: In case of Boot/HDD/UEFI sequence, if they are read-only, then toggle buttons
(+ and -) and submit button are not visible. On BIOS setup page, dependencies may exist
between the various attributes for Bios settings. Setting an attribute value may change the
state of the dependent attributes to non-editable or editable. For example, changing the
Boot Mode to UEFI from the Boot Settings page does not allow you to configure the Boot
or Hard-Disk Drive Sequence in the BIOS Boot Settings page. When the page is non-
editable, the toggle buttons on the page allows toggling the order of the boot sequence.
However, settings cannot be configured since “Apply” button will not available to submit
the settings.
 BITS050574: On 11G and 12G systems running the Linux OS, the omreport system
summary command displays “RAC Command Interface” as 7.1.0. “RAC Command Interface”
is a DRAC4 RPM and its version is 7.1. It is installed as a dependent package for iDRAC6 and
iDRAC7 Command Interface packages.
 If a new certificate imported to Server Administrator is not active after restarting the Web
server, restore the previous certificate.
To restore the previous certificate, do the following:
1. Stop the Web server.
2. Perform one of the following as applicable:
On systems running Windows:
o Delete the file keystore.db at <installed directory>\Dell\SysMgt\apache-
tomcat\conf\
o Rename the file keystore.db.bak at <installed directory>\Dell\SysMgt\apache-
tomcat\conf\to keystore.db
On systems running Linux:
 For 32-bit OS
o Delete the keystore.db file at /opt/dell/srvadmin/lib/openmanage/apache-
tomcat/conf