Release Notes

• Some complex "omconfig" CLI commands that contain multiple set operations have been
modified to avoid the above problem. While executing a CLI command if the message,
"Error! Illegal combination of parameters" is displayed, modify your command into several
simpler commands. Each command should change only one setting.
• When running Server Administrator on a system with a traditional Chinese operating
system, the application pages are displayed in simplified Chinese. To view the Server
Administrator pages in English, go to your browser language preference page and change
the language to English.
• Log files saved from Server Administrator are saved in zip format. It is recommended that
you open this zip file using WinZip. Windows Server 2003 or Windows XP embedded
"Compressed (zipped) Folder" utility is not recommended.
• After configuring BIOS settings on certain systems, a second reboot may be required for
the Server Administrator to display the updated BIOS settings properly.
• If you import an invalid root certificate into Server Administrator, using "Preferences->
General Settings-> Web Server-> X.509 Certificate", and try to log on to the application
after restarting the Web server, a blank page is displayed. To fix this issue, restore your
original "keystore.db" file before importing a valid root certificate. To restore the
"keystore.db" file, use both the basic operating system commands and the Server
Administrator Command Line Instrumentation (CLI).
Perform the following steps from your operating system command line:
o Type: omconfig system webserver action=stop
o Locate the "keystore.db.bak" file. The default path is "C:\program
files\dell\SysMgt\apache-tomcat\conf".
o Copy "keystore.db.bak" to "keystore.db".
o Type: omconfig system webserver action=start
• A temperature drop below a minimum failure threshold does not cause a system reset
even if this alert action is set.
• Clicking the "Back" and "Refresh" buttons on the browser may not display the correct page
with respect to the Server Administrator component tree, tabs, tab menus, or help, as
Server Administrator has been designed with limited functionality to reduce overhead. Full
feature capabilities of the Web browser such as "Back", "Refresh", and "Open in New
Window" may not be supported.
• Selecting the boot sequence under the BIOS "Setup" tab does not re-enable boot devices
that have been disabled in the System Setup Program, earlier.
• The links on the Server Administrator home page may not work after repeated random
clicking. To resolve this issue, refresh the browser by pressing <F5> or click the browser
"Refresh" button.
• All unsecured HTTP requests to Server Administrator receive an invalid response. Server
Administrator runs only one instance of the Web server, which is secure. Make all
connections through https://<ip address> : <port number>. Any "http://<ip address>: <port
number>" request for connection with the server receives an invalid response.
• If the browser used with Server Administrator does not display a page or perform an
action, make sure that the browser is in online mode. To go online, perform the following:
o In Internet Explorer, on the menu bar, click "File" and clear the "Work Offline"
option. When "Work Offline" is selected, a check mark is displayed to the left
of the option on the "File" menu.
• If Internet Explorer prompts you to "Work Offline", "Connect", or "Try Again", always select
"Connect" or "Try Again". Do not select "Work Offline".
• While setting dates in the "Asset Information" section of the Server Administrator home
page, the current time is appended to the date. While setting dates with the CLI, the
appended time is noon.