Reference Guide

CIM_PCIDevice

The CIM_PCIDevice class shown in Table below describes the capabilities and management of a PCI device controller

on an adapter card.

Table 37. CIM_PCIDevice Properties

Class Name:

CIM_PCIDevice

Parent Class:

CIM_PCIController

Property Description Data Type

BaseAddress Identifies an array of up to six double-

word base memory addresses.

uint32

SubsystemID Identifies a subsystem identifier code. uint16

SubsystemVendorID Identifies a subsystem vendor ID. ID

information is reported from a PCI

device via protocol-specific requests.

This information is also present in the

CIM_PhysicalElement class (the

manufacturer property) for hardware,

and the CIM_Product class (the vendor

property) for information related to

product acquisition.

uint16

ExpansionROMBaseAddress Identifies a double-word expansion

ROM base memory address.

uint32

CIM_PCIBridge

The CIM_PCIBridge class described in PCIBridge Properties describes the capabilities and management of a PCI

controller providing bridge-to-bridge capability. An example is a PCI to Industry-Standard Architecture (ISA) bus bridge.