Reference Guide

Property Description Data Type
LowerThresholdCritical If the current reading is between
upper threshold critical and upper
threshold fatal, the current state is
critical. See Figure 3‑2.
sint32
IsLinear Indicates that the sensor is linear over
its dynamic range.
Boolean
Manufacturer Provides the name of the organization
responsible for producing the
CIM_PhysicalElement or
CIM_SoftwareElement. This may be
the entity from whom the element is
purchased, but not necessarily.
Purchase information is contained in
the vendor property of CIM_Product.
string
Name Defines the label by which the object
is known. When subclassed, the
Name property can be overridden to
be a Key property.
string
Status Provides a string indicating the status
of the component. Status values
include:
Operational Status Values:
• OK indicates that the object is
functioning normally.
• Degraded means that the item
is functioning, but not
optimally.
• Stressed indicates that the
element is functioning, but
needs attention. Examples of
Stressed states are
overloaded, overheated, and
so on.
Nonoperational Status Values:
• Non-recover means that a
nonrecoverable error has
occurred.
• Error means that an element
has encountered an
operational condition that is
severe as compared to its
normal mode of operation.
string
SystemCreationClassName Indicates the system’s creation class
name.
string
UnitModifier Provides the unit multiplier for the
values returned by this sensor. All the
values returned by this sensor are
represented in units of 10 raised to the
power of the unit modifier. If the unit
modifier is –6, then the units of the
values returned are microvolts. The
units apply to all numeric properties of
sint32
10