User's Manual

Storage Information and Global Tasks 69
Minimum Required
Firmware Version
This property displays the minimum firmware version that
is required by Storage Management. This property is only
displayed if the controller firmware does not meet the
minimum requirement.
The firmware and drivers listed in the Server Administrator
Readme refer to the minimum supported version for these
controllers. Later versions of the firmware and drivers are
also supported. For the most recent driver and firmware
requirements, contact your service provider.
Driver Version This property displays the version of the controller’s driver.
The firmware and drivers listed in the Server Administrator
Readme refer to the minimum supported version for these
controllers. Later versions of the firmware and drivers are
also supported. For the most recent driver and firmware
requirements, contact your service provider.
Minimum Required
Driver Version
This property displays the minimum driver version that is
required by Storage Management. This property is only
displayed if the controller driver does not meet the
minimum requirement.
The firmware and drivers listed in the Server Administrator
Readme refer to the minimum supported version for these
controllers. Later versions of the firmware and drivers are
also supported. For the most recent driver and firmware
requirements, contact your service provider.
Number of
Connector
This property displays the number of connectors the
controller has. Each connector can be attached to physical
disks or an enclosure. Depending on the controller type, the
connector can be either a SCSI channel or a SAS port.
Rebuild Rate The rebuild rate is the percentage of the system’s resources
dedicated to rebuilding a failed disk when a rebuild is
necessary. For more information, see
Set Rebuild Rate .
Alarm State This property displays whether the controller’s alarm is
enabled or disabled.
Cluster Mode This property indicates whether the controller is part of a
cluster configuration.
Property Definition